The principle of the waste gas purification tower is to use the characteristics of activated carbon adsorption to adsorb the organic waste gas molecules in the industrial waste gas treatment equipment to the waste gas purification tower to achieve the purpose of purification. The waste gas purification tower has brought great benefits to the enterprise. The waste gas enters from below the tower and comes out from above. The side of the waste gas tower is filled, and the waste gas components in the waste gas are removed in the filling layer. So what are the precautions in the use process? Today let Chaori Purification little editor to tell you.

When using the exhaust gas purification tower, pay attention to the following points:

1. The exhaust gas purification tower device should be more than 100mm higher than the ground, and it is based on concrete, and the pump and fan should be made another concrete foundation according to the requirements.

2, in the transportation process to pay attention to maintenance, can not damage the body and other parts.

3, if the exhaust gas purification tower is installed outdoors, anti-freezing measures should be taken at the bottom of the pool in winter.

4, before use, the absorbent liquid must be injected according to the liquid level symbol at the bottom of the equipment, and pay attention to the supplement of the absorbent liquid during operation.

5, the exhaust gas purification tower should open the circulating pump for 2-3 minutes before use, and then start the blower, and stop the blower for 1-2 minutes before stopping the circulating pump.

6, the exhaust gas purification tower should be a year and a half to two years to do a check and maintenance, check and clean the exhaust gas purification tower.

The use of waste gas purification tower allows the waste gas emitted by the factory to be effectively improved and meet the emission standards. Not only to optimize the environmental problems, but also to solve the problems of enterprises, exhaust gas purification tower is widely used in electronics, chemical, rubber, automotive and other industries, its purification efficiency is high, occupies a small area, has been welcomed by many enterprises and factories. If you have the purchase need of exhaust gas purification tower, you can contact us at any time.