Odor treatment in the application of PP activated carbon activated carbon adsorption fine adsorption method deodorization, the first consideration is the selection of the type of activated carbon, there are many types of activated carbon, should be for the nature of the malodorous substances, with the experimental method of selection, and strive to select the adsorption ability, adsorption capacity
Large adsorption capacity, adsorption speed, small resistance, easy to regenerate the activated carbon, to achieve good performance and low price.

When it is used for air exchange de-oiling, special attention should be paid to the selection of activated carbon with large adsorption capacity, because the activated carbon of this kind of device may be replaced only once in several years. In the fluidized bed adsorption deodorization, but also pay special attention to the selection of good mechanical strength of the activated carbon. Sometimes in order to adsorb a particular malodorous gas, you can take the technology of activated carbon impregnation, in order to improve the adsorption capacity of activated carbon. In recent years, activated carbon fiber felt has been widely used in waste gas deodorization.
The choice of activated carbon adsorption box form:In general, the choice of fixed-bed exhaust gas treatment device is more occasions.
Odor treatmentWhen using activated carbon to deal with malodorous gases, according to the concentration of malodorous gases, composition and which contains no dust, aerosols and other impurities, appropriate pretreatment measures or the use of several methods of joint process.
Our company developed and produced pp activated carbon adsorption box, high purification efficiency (more than 90%), equipment covers an area of small, corrosion-resistant, easy to maintain, does not produce secondary pollution, especially for higher concentrations of waste gas purification and treatment.
PP activated carbon adsorption box or recovery of gas types are: benzene, toluene, xylene, gasification, ketone, alcohol, helium, methyl mercaptan, xenon sulfide, dimethyl sulfide, trimethyl ammonia and other organic solvents. It can also deal with organic waste gas and malodorous gas separately, and is applied to spray paint mist purification, welding fume treatment application areas: printing rubber, looking forward to the material, pharmaceutical, manufacturing and chemical industry.
Principle of operation activated carbon treatment of organic waste gas and recovery device, is the use of PP activated carbon tower efficient adsorption material activated carbon, strong adsorption capacity, adsorption, desorption speed to purify the air, recovery of organic solvents.
PP activated carbon adsorption box to deal with organic waste gas: divided into the inlet, carbon over the port and out of the wind section, organic waste gas from the inlet into the box, the purified exhaust gas from the ventilator into the atmosphere, the adsorption saturated activated carbon can be regenerated, regeneration of activated carbon can be reused.